These photographs are from a Quarry Tile Cleaning job we did for a house owner in Cambridge, I’m afraid my photographs are not the best but I think you can see how the Quarry tiles were looking discoloured and worn.
Cleaning Kitchen Quarry Tiles
Working in sections the floor was wetted with a dilution of Tile Doctor Pro-Clean combined 50/50 with Nanotech UltraClean, these two products combine to make a powerful and effective cleaning solution that’s safe to use on tile and stone. The solution was left to soak into the tile for twenty minutes whilst we got our machinery ready.
It helps if you have the right tools for the job and in this case we fitted a scrubbing pad to a rotary buffing machine and working the cleaning solution into the floor to scrub away the ingrained dirt. The machine can struggle to get into the grout lines so these need to be scrubbed by hand using a stiff brush and more cleaning solution. Once the floor was clean the soiled solution was picked up using a wet and dry vacuum and then washed down with clean water to remove any trace of chemical. This revealed a few stubborn areas that needed further work so these were re-treated and the floor washed down again and then left to dry overnight.
Sealing Kitchen Quarry Tiles
We came back the next day to seal the floor and after checking the tiles had indeed dried we proceeded to apply Tile Doctor Seal and Go which is a water based sealer (no smell) that really brings out the shine and colour in Quarry tiles. Around five coats were sufficient and once it had dried the floor was transformed.