Large Limestone Floor Polished to a Deep Lustre in Boxworth

I was asked to visit a house in Boxworth Cambridge to survey a large Limestone tiled kitchen, dining room, utility and hallway. The customer was not happy with the finish of the tiles and wanted it to have more lustre. Additionally, the floor had suffered some damage in the dining room where the floor had been scratched by table and chair legs.

Limestone Tiled Floor Before Cleaning Boxworth Cambridge Limestone Tiled Floor Before Cleaning Boxworth Cambridge

Boxworth is a small village of around 100 houses, this property being one of the larger ones. The village lies around eight miles to the north west of Cambridge. I examined the floor and discussed with the client the process we would use. Although not looking their best, I could see that the Limestone tiles contained a variety of natural colour shades which with the right treatment could be made to really come to life. I presented a quote which they were happy to accept.

Limestone Tiled Floor Before Cleaning Boxworth Cambridge Limestone Tiled Floor Before Cleaning Boxworth Cambridge

Cleaning a Limestone Tiled Kitchen and Hallway Floor

My first job was the protect all the surrounding areas from splashing during the cleaning process. To do this I removed the kickboards from underneath some of the kitchen units, elsewhere was covered with a blue protective film.

To start the cleaning, I first applied a dilution of Tile Doctor Remove and Go to the floor and then worked it in using a black scrubbing pad fitted to a rotary machine. I also scrubbed the grout by hand as the pads can struggle to reach into the recessed grout line. After rinsing the floor with water, the soiled solution was then extracted off the floor using a wet vacuum.

Limestone Tiled Floor During Polishing Boxworth Cambridge Limestone Tiled Floor During Polishing Boxworth Cambridge

I followed up this process with the application of a set of Diamond burnishing pads starting with the coarse 400-grit pad, then medium 800-grit pad, fine 1500-grit pad and finishing with the extra fine 3000-grit pad. The pads are fitted to a rotary floor buffer and are run over each tile using water for lubrication. All the slurry produced by the cleaning pads is removed away using our truck mounted hot water extraction machine to cause minimum mess to the client.

The floor was left to dry off overnight and I would return the next day to finish the polishing process.

Sealing a Limestone Tiled Kitchen and Hallway Floor

On the following day, we checked the floor was completely dry and then using a white buffing pad ground Tile Doctor Shine Powder into the Limestone floor. The powder builds up a deep and durable polish on the tiles leaving a deep and resilient lustre.

Limestone Tiled Floor After Polishing Boxworth Cambridge Limestone Tiled Floor After Polishing Boxworth Cambridge

To further protect the stone and enhance the natural colours in the Limestone a couple of coats of Tile Doctor Colour Grow impregnating sealer were applied followed by a light buff with a red pad. The sealant is an impregnator that seeps into the pores of the stone protecting it from within and intensifying the natural colours in the stone.

When finished the floor looked great. We had managed to remove the scratches from the dining area and the floor now had the lustre that the client had been hoping for.

The client was extremely happy with the outcome and gave the following feedback:

“Quoted very quickly, carried out the work quickly and efficiently with no fuss.”

Limestone Tiled Floor After Polishing Boxworth Cambridge Limestone Tiled Floor After Polishing Boxworth Cambridge


Professional Restoration of a Limestone Flooring in Cambridgeshire

Polishing Dull Limestone Floor Tiles to a High Shine in Boxworth

Boxworth is a very small village situated to the north-west of Cambridge. In the Middle Ages, it had a significant population, but in the modern day there are only around 100 houses in the area including one belonging to my customer.

I was there to take a look at a large installation of Polished Limestone floor tiles which had been laid throughout the ground floor including the Kitchen, Dining, Utility room and hallway.

Limestone Tiled Kitchen Before Polishing Boxworth Limestone Tiled Dining Room Before Polishing Boxworth

Many people will already know that Limestone is a premium, yet somewhat sensitive natural stone. It’s also porous, meaning that dirt can easily become ingrained if the tiles are not sealed properly, or if the sealant has worn away. This leads eventually to a very unappealing, dirty, and dull appearance which often happens so slowly it hardly get’s noticed until one day you think, “I’m sure my floor looked better than that before!”.

Limestone Tiled Hallway Before Polishing Boxworth Limestone Tiled Utility Before Polishing Boxworth

In this case the sealer had degraded over time and my customer had called me in because she was now no longer happy with the appearance of the tiles. The lustre the tiles once had eventually disappeared and there was also damage in some areas caused by the placement of table and chair legs. I was asked to restore a high-quality polished finish to the tiles.

Cleaning and Burnishing Limestone Tiles

Before beginning the restoration, I took the necessary precaution of covering the walls and kitchen units to protect them from exposure to any cleaning products or mess.

To begin, I applied Tile Doctor Remove and Go, which is a high-performance stripping agent, to break down any old sealant remaining of the tiles. This product can also be used to clean the stone itself, as well as the grout lines.

After completing the initial cleaning process, I moved on to restoring the polish to the tiles. At Tile Doctor, we do this using a system we have developed called Burnishing. This system involves the application of Diamond encrusted pads – each possessing a different level of grit – to grind away the dirt from the stone, which is often stained or damaged. The process effectively resurfaces the stone leaving it looking new and fresh.

Firstly, I applied the Coarse 400 grit pad, fitted to a rotary machine, to grind away any excess muck and sealant lubricated with a little water. The resultant slurry was rinsed away and I followed up with the application of the Medium 800 grit pad to start the restoration of the polish again with a small amount of water, followed by the Fine 1500 grit pad for the second polish.

Finally, I applied the Very Fine 3000 grit pad to achieve the most refined and highest quality polish possible. The process of burnishing is a gradual but highly effective means of achieving this kind of finish.

Any slurry that was created through this process was removed using my truck-mounted hot water cleaning and extraction machine, resulting in minimum mess.

Sealing Limestone Tiles

After burnishing the tiles and to achieve a really hard wearing and high polish I covered the floor in Tile Doctor Shine Powder crystals and buffed them into the Limestone tiles using a White buffing pad. Then to give the floor extra protection I applied a coat of Tile Doctor Colour Grow, which impregnates the pores of the stone to prevent ingrained dirt.

Colour Grow also intensifies the natural colours in the Limestone, thus improving the appearance of the stone to an even greater extent. Following the application of Colour Grow, I gave the tiles a final light buffing with a soft red pad.

Limestone Tiled Kitchen After Polishing Boxworth Limestone Tiled Utility After Polishing Boxworth

The customer was extremely happy with the outcome, remarking that the work was carried “quickly and efficiently with no fuss.” I took lots of photographs of the process, so you can really appreciate the difference that was made.

Limestone Tiled Hallway After Polishing Boxworth Limestone Tiled Dining Room After Polishing Boxworth


Professional Polishing of a Dull Limestone Tiled Floor in Cambridgeshire