These photographs are from that lovely old period property in the village of Harston near Cambridge, you may recall an earlier post where I worked on the Victorian Tiled hallway. These photographs are from the Slate Tiled Kitchen floor which they asked me to clean and re-seal as well.
Cleaning the Slate Tiled Floor
The process for cleaning and sealing slate is very similar to Victorian and Quarry tiles so this was as they say a bread and butter job for a Tile Doctor. The beauty of working in a kitchen is I was able to remove the kick boards instead of having to protect the skirting boards with tape. Once the preparation was done a dilution of Tile Doctor Pro-Clean was applied and left to soak into the Slate tile for a while before being worked in using a rotary machine fitted with a black scrubbing pad. Pro-Clean by the way is an alkaline cleaner so it’s safe to use on tile and stone unlike some acidic products which will cause damage over time.
As before I re-applied Pro-Clean on any stubborn stains and also gave the grout lines a good scrub with a stiff hand brush to make sure they were clean. Once happy with the general condition of the tile it was time to use the spinner tool which applies hot water under pressure effectively rinsing the floor whilst removing the water at the same time with suction. This does a great job of rinsing the floor and removing any trace of cleaning product before sealing, this is important to ensure a good finish when sealing.
Sealing the Slate Tiled Floor
The spinner tool does a good job of removing liquids from floors however the tile was still damp so it was left to dry assisted with air blowers until dry. Now normally I would use Tile Doctor Seal and Go to seal slate tile however the customer wanted a matt finish for this surface so it was sealed using two coats of Tile Doctor Ultra Seal which provides a more natural look it’s also recommended for use in food preparation areas.
Cleaning and Sealing a Slate tiled kitchen floor in Harston, Cambridgeshire
These photographs are from a lovely old period property in the village of Harston near Cambridge which had an original Victorian Tiled floor installed throughout the hallway and stairwell. Considering its age the tiles were in a very good condition but they were looking dull and overdue for a deep clean and re-seal.
Cleaning the Victorian Tiled Floor
Working in sections the first step was to protect the beautiful skirting boards with clear plastic fixed with decorator’s masking tape. This was followed by applying a dilution of Tile Doctor Pro-Clean and letting it soak into the tile for about 20 minutes before being agitated using a rotary machine fitted with a black scrubbing pad.
This did a good job of cleaning the floor however there were some stubborn stains that needed further attention so more Pro-Clean was applied and worked in with a stiff hand brush as a steamer was used to help lift the dirt out of the pores in the tile. Once we were happy with the floor the soiled cleaning fluid was removed from the floor using a spinner tool which applies hot water under pressure effectively rinsing the floor whilst removing the water at the same time with suction.
Sealing the Victorian Tiled Floor
The floor was left to dry assisted with air blowers before moving on to sealing with Tile Doctor Seal and Go which is a recommended sealer for Victorian floor tiles that provides on-going stain protection as well as adding a nice subtle shine to the floor.
The customer was really pleased with the results and even asked us back to do the slate tiles in the kitchen something I will no doubt write about in a later post.
Victorian Floor Cleaned and Sealed in Harston, Cambridgeshire